A numerical investigation of the resonance of gas-filled microbubbles: resonance dependence on acoustic pressure amplitude

The general Keller–Herring equation for free gas bubbles is augmented by specific terms to describe the elasticity, viscosity and thickness of the encapsulating shell in ultrasound contrast agent microbubbles. A numerical investigation that analyses the acoustic backscatter from bubbles is employed to identify resonance frequencies that can be compared, for increasing driving pressure amplitude, with linear approximations obtained via analytical considerations. Calculations for bubbles of the size employed in diagnostic ultrasound, between 2 and 6 μm diameter, that are immersed in water and blood and exposed to monochromatic insonation, causing the bubbles to undergo stable cavitation, reveal that the resonance frequency diverges from the linear approximation as the pressure amplitude is increased. The shift in resonance, to lower frequency values, is found to be more pronounced for larger bubbles with the calculated value differing by up to 40% from the linear approximation. The results of this simulation might be potentially useful in preparation of formulations of ultrasound contrast agents with the specifically desired features, such as for instance resonance frequency.     

Electrochemical behavior of Li intercalation processes into a Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 cathode

Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (X=0.17, 0.25, 0.33, 0.5) compounds are prepared by a simple combustion method. The Rietvelt analysis shows that these compounds could be classified as having the α-NaFeO₂ structure. The initial charge-discharge and irreversible capacity increases with the decrease of x in Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂. Indeed, Li[Ni_0.50Mn_0.50]O₂ compound shows relatively low initial discharge capacity of 200 mAh/g and large capacity loss during cycling, with Li[Ni_0.17Li_0.22Mn_0.61]O₂ and Li[Ni_0.25Li_0.17Mn₀.₅₈]O₂ compounds exhibit high initial discharge capacity over 245 mAh/g and stable cycle performance in the voltage range of 4.8 -2.0 V. On the other hand, XANES analysis shows that the oxidation state of Ni ion reversibly changes between Ni²⁺ and about Ni³⁺, while the oxidation state of Mn ion sustains Mn⁴⁺ during charge-discharge process. This result does not agree with the previously reported ‘electrochemistry model’ of Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂, in which Ni ion changes between Ni²⁺ and NI⁴⁺. Based on these results, we modified oxidation-state change of Mn and Ni ion during charge-discharge process.     

Wavelength-scanning Talbot effect and its application for arbitrary three-dimensional step-height measurement

We demonstrate the phenomenon of Talbot self-image plane shift by tuning the wavelength of the broadband light source. A superluminescent diode (SLD) is used as a broad-band light source and an acousto-optic tunable filter (AOTF) as wavelength-scanning device. A periodic grating is illuminated by the wavelength tuned light of SLD using AOTF and Talbot self-image plane is shifted continuously in the longitudinal direction without mechanically moving the grating. The wavelength-scanning Talbot effect is then implemented for the measurement of arbitrary step-height of discontinuous objects with extended range. The main advantages of the proposed system are non-mechanical scanning, high stability because of it’s common-path geometry and compactness. Since the measurement of the phase is not required the system is free from phase ambiguity problem and therefore, the range of measurement is large as compare to interferometric techniques.     

Anomalous capacitance of quantum well double-barrier diodes

The S-parameters of several different quantum well double barrier diodes have been measured. A technique has been developed for measuring whisker contacted diodes with and HP 8510B automatic network analyzer. Special coaxial mounts using K-connectors were designed to enable measurements up to 20 GHz. The voltage-dependent conductance and capacitance were derived from the measured reflection coefficient of each device. The C/V characteristics were observed to exhibit an anomalous increase at voltages corresponding the the negative differential resistance region (NDR). These are the first reported S-parameter measurements in the negative differential resistance region of quantum well double barrier diodes. A theory is presented that explains, in part, the observed results.     

Fairness in Scheduling

On-line machine scheduling has been studied extensively, but the fundamental issue of fairness in scheduling is still mostly open. In this paper we explore the issue in settings where there are long-lived processes which should be repeatedly scheduled for various tasks throughout the lifetime of a system. For any such instance we develop a notion ofdesiredload of a process, which is a function of the tasks it participates in. Theunfairnessof a system is the maximum, taken over all processes, of the difference between the desired load and the actual load.An example of such a setting is thecarpool problemsuggested by Fagin and Williams [IBM Journal of Research and Development27(2) (1983), 133–139]. In this problem, a set ofnpeople form a carpool. On each day a subset of the people arrive and one of them is designated as the driver. A scheduling rule is required so that the driver will be determined in a “fair” way.We investigate this problem under various assumptions on the input distribution. We also show that the carpool problems can capture several other problems of fairness in scheduling.     

Specific identification of Bacillus anthracis strains

Accurate identification of human pathogens is the initial vital step in treating the civilian terrorism victims and military personnel afflicted in biological threat situations. We have applied a powerful multi-dimensional protein identification technology (MudPIT) along with newly generated software termed Profiler to identify the sequences of specific proteins observed for few strains of Bacillus anthracis, a human pathogen. Software termed Profiler was created to initially screen the MudPIT data of B. anthracis strains and establish the observed proteins specific for its strains. A database was also generated using Profiler containing marker proteins of B. anthracis and its strains, which in turn could be used for detecting the organism and its corresponding strains in samples. Analysis of the unknowns by our methodology, combining MudPIT and Profiler, led to the accurate identification of the anthracis strains present in samples. Thus, a new approach for the identification of B. anthracis strains in unknown samples, based on the molecular mass and sequences of marker proteins, has been ascertained.     

Adaptive decentralized congestion avoidance in two-dimensional traffic

This paper studies congestion avoidance in a simple two-dimensional traffic system, using computer simulation. The mobile objects avoid congestion among themselves using simple congestion-avoiding traffic rules. The objects adaptively avoid congested regions and move towards less congested regions. The objects avoid congestion in decentralized manner based only on congestion levels in their local regions. It is found that the adaptive decentralized congestion-avoiding traffic rules prevent the traffic from undergoing congestion phase transition at low critical density. The congestion avoidance significantly increases the traffic capacity. The congestion-avoiding traffic rules increase the traffic capacity by keeping the emerging congestion and traffic hot spots small, localized, and temporary. Due to congestion avoidance, the travel time of objects is high and the amount of flow is low. The congestion-avoiding traffic eventually undergoes phase transition from free flow to jammed state, but at high critical density.     

Conductivity and dielectric properties of sol–gel derived porous zirconia

The 8-mol percentage Y₂O₃-stabilized Porous Zirconia was prepared using sol–gel method. Zirconium oxalate gel was prepared by the addition of appropriate amount of oxalic acid solution into the 1 M aqueous solution of zirconium-oxy chloride. A cubic phase zirconia powder was obtained by calcination and milling of the zirconium oxalate gel. Crystallization temperature was found about 450 °C from the Differential thermal analysis. The phase analysis by X-ray diffraction shows the presence of cubic phase. Pellets sintered at 1,350 °C were highly porous, and the electrical conductivity was found with lower value due to the porosity, and the hardness was about 8.0 GPa. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Melting of heterogeneous vortex matter: The vortex ‘nanoliquid’

Disorder and porosity are parameters that strongly influence the physical behavior of materials, including their mechanical, electrical, magnetic and optical properties. Vortices in superconductors can provide important insight into the effects of disorder because their size is comparable to characteristic sizes of nanofabricated structures. Here we present experimental evidence for a novel form of vortex matter that consists of inter-connected nanodroplets of vortex liquid caged in the pores of a solid vortex structure, like a liquid permeated into a nanoporous solid skeleton. Our nanoporous skeleton is formed by vortices pinned by correlated disorder created by high-energy heavy ion irradiation. By sweeping the applied magnetic field, the number of vortices in the nanodroplets is varied continuously from a few to several hundred. Upon cooling, the caged nanodroplets freeze into ordered nanocrystals through either a first-order or a continuous transition, whereas at high temperatures a uniform liquid phase is formed upon delocalization-induced melting of the solid skeleton. This new vortex nanoliquid displays unique properties and symmetries that are distinct from both solid and liquid phases.     

Photoemission studies of oxygen adsorbed on a LiAl(1 1 0) alloy surface: Role of Li segregation

We investigated that the effect of the number of segregated Li atoms on the rate of oxidation on a LiAl alloy surface. Oxygen molecules adsorbed on the LiAl alloy react with the surface atoms to form stable oxides. The segregated Li atoms at reconstructed surfaces (c(2×2) and (2×1)) enhance the oxidation rate and form stable LiAlO_x and Li₂O. The degree of enhancement of oxidation by segregated Li atoms varies as a function of O₂ exposure and annealing temperature, where the latter is directly related to the mode of surface reconstruction by Li segregation.